I love the look of using an ottoman as a coffee table. But large upholstered ottomans can be so (!) expensive.
I think I shared this story before, but a few years ago we lived in Washington D.C., where there is a Restoration Hardware outlet. One magical/terrible day I walked into the store and there, right in front of me, was the most gorgeous and glorious upholstered ottoman (normally $1200). Price tag? $150. No joke. With the understanding that the salesperson knew I wanted to buy the ottoman, I stepped out of the store (no reception inside) to call my husband about the purchase (our rule is no purchases over $100 without a team discussion). I skipped back inside the store after getting the go-ahead from Michael, only to find the ottoman no where in sight. Someone else had bought it in those few short minutes and I felt like such a fool. Saddest. day. ever.
Fast forward two years and I'm still thinking about the gorgeous velvet ottoman. Since I don't have $1200 to spend on the same RH ottoman, I decided to try and make a similar ottoman out of a coffee table.
I decided that I needed a smaller size ottoman for our living room. I thought 35-40" would be the right size. And it couldn't be more than 16" tall. And I wanted a square table, not a rectangle. And I wanted sort of chunky, turned legs. I know, picky, right?
But Craig's List came through for me again. $25 for this heavy, solid wood piece.
Perfect dimensions (36x36x16). Just needed some paint on the legs for that dark-stained look I wanted. I used Ralph Lauren's "Galvenized" in eggshell for two coats and sealed it after that.
I marked out where I wanted my 16 tufting buttons to lay and drilled holes in the table top.
Then I used a little spray adhesive to hold my 2" foam (from JoAnns) in place.
I also cut up some of the left over foam and adhered foam strips to the apron of the table to fill in the empty space under the lip.
Then I wrapped the apron in batting and then the whole table was covered in a sheet of quilt batting (no photo of that step, sorry).
Using the 16 drilled holes as my guide, I adhered the tufting buttons (which I made with a button kit from JoAnns) with upholstery thread and a long needle.
I used regular plastic buttons to anchor the tufts on the underside of the table.
Once all the tufts were in place, I stapled the fabric edges to the underside, being sure to pull the fabric really tight. Then I tackled the corners, which was the trickiest part.
I decided to use upholstery nails on just the leg area where I did sort of hospital bed corners with the fabric. I might end up redoing this part, but I think it's fine for now.
Here's the finished product. What do you think? Does my $60 project compare with the $1200 Restoration Hardware ottoman? Maybe not, but it will do for now!
This is such a great project!
ReplyDeletei have been on the hunt for a ottoman like this - thank you for the inspiration :)
ReplyDeletethis is an awesome project. And if you were thinking about fixing the fabric around the legs, I'd just remove the legs and tack the fabric to the wood underneath (eve with a staple gun) and then reattach the legs this way they have the tucked and finish look of your inspiration photo without much extra work.
ReplyDeleteThis could not have come at a better time! I myself have been scouring craigslist for a coffee table to do this exact project. Thank you for the boost in confidence that I CAN do this! It looks great btw. :-)
ReplyDeleteYou never cease to amaze me - seriously, you blog is my favorite out there*! I've already saved a number of your DIY projects (hello roman shades!) but this one takes the cake. I was planning on buying a large tufted leather ottoman from Overstock, but now I'm thinking of scoring something at Salvation Army and trying your amazing DIY action!
ReplyDeleteThanks for the amazing blog!!
*One day I literally started from your first post and read your entire blog to your most current post. It was SUCH a great read!
you rock so hard!
ReplyDeleteI love it. I also did a similar project, but without tufting... I really like that effect, but wasn't sure how to do it... now thanks to your post I do. Maybe next time.
ReplyDeleteThis looks so good. And the bragging rights? Worth more than $11,940, for sure.
ReplyDeleteWhat kind of fabric did you use?
I have an idea to do this on a smaller scale with a small bench we found at a garage sale. I just hope it's not TOO easy, or I might end up upholstering all the hard furniture in my house. Padded room?? Yes please.
Good for you!
ReplyDeleteThis is amazing! I live in DC. I'm going to have to hunt down this RH outlet.
ReplyDeleteThis is lovely. And you make it look so easy! It is hard to not let this project jump the queue over all my others...
ReplyDeleteNikinikinine -
ReplyDeleteUnfortunately the legs don't come off the coffee table, that's why I had to come up with the nailhead trim solution. It's not perfect, but it does the trick.
Abby -
The RH outlet is in Leesburg, VA. There is also a Pottery Barn and Crate and Barrel (I think) outlets in the same mall. Not to mention Banana Republic and J.Crew. Also an Off Saks 5th?? Yeah, it's good.
Everyone else - thanks so much for all the sweet comments. I love and appreciate each one!
It's official: you are the MacGyver of interior design!
ReplyDeletethis is wonderful! You have such great D.I.Y. ideas! Thanks for sharing :-)
ReplyDeleteGood heavens I am completely and utterly floored! Way to go Jennica! And yes, I think your project was incredible!
ReplyDeleteLooks terrific! Also loved seeing more of your living room and the blue walls. My husband & I lived in Cambridge '86 - 90 at 18 Forest Street off of Mass Ave. Loved it! We took our kids back to see our old haunts in Dec. - was a fun trip down memory lane.
ReplyDeletegirl, you are FANTASTIC!!! I have been looking for this exact thing!! I couldn't believe how expensive they were though. You are gonna save me $$$$ - thank you!!!
ReplyDeleteGorgeous! I'd trim the legs down 2-3" and then it would be perfect for MY living room.
ReplyDeleteomg - this is amazing!!! it looks fabulous!!!!!!!! I wish I could do stuff like this - I'm so bad with my hands. WOW, I am SO impressed!
ReplyDeletethanks for your sweet comment today too!!
where does it end with you?! seriously. first the roman shades from mini blinds and now this! it looks AWESOME! really.
ReplyDeleteYou did such a great job!!! The only think I might think to do is cut off the legs, staple the fabric underneath and then screw on more delicate legs.
ReplyDeleteYour ottoman is incredible!! I really love it. I never would have thought a project like this would be as do-able! You did such a great job.
ReplyDeleteThat is such a great idea!
ReplyDeleteHoly crap did M know he was marrying such a goldmine? That is pretty. I'm doing it tomorrow!
ReplyDeletei wouldn't be able to forget a restoration hardware snatch like that either, but your project looks fantastic. i'm impressed!
ReplyDeleteLovely job!!
ReplyDeleteI love it! I have been wanting to make an ottoman for months. Your project has inspired me and given me some ideas. Thanks for sharing!
ReplyDeletePure genius!
ReplyDeleteHow did I never notice your blog before?!?! And another Boston blogger, I'm so excited right now! I've started reading though and I LOVE everything, love your blog! I'm going to spend the rest of the night reading, I'm very excited.
ReplyDeletethis is insanely awesome! I'm loving your blog!
ReplyDeleteIncredible. Looks awesome!
ReplyDeleteExcellent!
ReplyDeleteSuch a great idea, thank you for sharing.
ReplyDeletethat's it, your blog is officially "must try DIY"
ReplyDeleteThis is amazing! I have followed your handiness but this brings it to a whole new level!
ReplyDeleteThat is AMAZING. What a great job.
ReplyDeletemost amazing thing i've seen ALL week!
ReplyDeleteVery impressive!
ReplyDeleteFantastic look and a great DIY project...there's going to be a run on country coffee tables on Craigs list now!
ReplyDeleteI was hoping the RH outlet was near Boston when I read that comment (and that I had just missed it). Love the RH but just can not afford it. Sigh...
Great job, congrats!
Andrea
Oh my - I so need to do this! It looks fantastic!
ReplyDeleteyou are incredible. I LOVE It. wish you were here to help me with this empty bore of a house ;)
ReplyDeleteI would never know that was a wood coffee table first! Such a great idea! You amaze me!
ReplyDeleteThis is amazing, thanx for inspiration!
ReplyDeletebrilliant!
ReplyDeleteGet out! I LOVE this!! We have an old coffee table that I was just going to get rid of when we moved, but I am totally doing this!
ReplyDeleteThanks for this great post!
Great project!! Love it!
ReplyDeleteThat's freaking fabulous!
ReplyDeleteFound you over at the Nesting Place!!
Wonderful project. Thanks for the great idea and the 'how to' tips.
ReplyDeleteI have that coffee table! Have had it for 13 years and have been looking to change it! Thanks! You did a great job and awesome tutorial!
ReplyDeleteWhat a great idea- we love this project. Found your blog on the Nesters. Great blog!
ReplyDeleteHi! I'm coming over from Nesting Place and I'm SOOOO glad I did. You did an incredible job. I love your creativity and ingenuity. And truly, I think this compares with the RH version. I also love the color of the fabric you used.
ReplyDeleteThanks for showing us how you did this!
That is AWESOME. Great job thinking through the whole process and coming up with an amazing end product! And thanks for posting all the pictures along the way!
ReplyDeleteFABULOUS! What an awesome idea and thank you for sharing this.
ReplyDeleteWanna see my redo? Come visit!!
that's amazing. i love it. how you do all this with your girls, I'll never know. i can barely clean, let alone do my own projects. . . it seems impossible!
ReplyDeleteI think that came out really great. I can imagine doing the same thing with plywood and stock legs from the home improvement store. I will keep it in mind for the future!
ReplyDeleteJennifer
WOW! When can you come over? Turned out beautifully!!
ReplyDeleteThat looks fantastic!! My sister is in the process of using Galvanized on her kitchen cabs. It's such a great color!
ReplyDeleteThat looks fantastic!! My sister is in the process of using Galvanized on her kitchen cabs. It's such a great color!
ReplyDeleteI am SO doing this. Awesome job!
ReplyDeleteKarol :0)
No way! That is the coolest trick ever. It looks totally fabulous!
ReplyDeleteOh, it's just awesome! I've been thinking about slipcovering my coffee table but you've given me something else to think about!
ReplyDeleteI found you through the Nester. You did a wonderful job with the tufts! They look great!
ReplyDeleteFabulous!! I have thought of doing something similar...now I may just try it. I'm so impressed!!
ReplyDeleteThank you for posting this. Nester sent me over. i have had the fabric draped over my coffee table for a month now & just been too chicken to do it my self. Off to Jo~anns to get the foam. Thanks
ReplyDeleteA few years ago I did this project using our breakfast table rather than a coffee table. Got the idea from Trading Spaces. My husband cut the legs and added casters for easy rolling. I did the foam thing as well as batting, muslin then made 2 slipcovers - one for fall/winter and one for spring summer so I can change out the look and wash at will. The ottoman is large, comfy for extra seating if needed and a creative approach to using what you have to fill a need. :o)
ReplyDeletejAne
http://tickleberryfarm.blogspot.com
THIS IS GREAT!!! Thanks for the step by step how-to. it's beautiful, you did a great job with that!
ReplyDeleteThis is brilliant! Your ottoman turned out great and it looks very professional, too; I'm quite impressed.
ReplyDeleteI saw this on Apartment Therapy and WOW-I love it! What a great use of a coffee table. In fact I have the exact same one in my garage! I got it at a yard sale a few years ago and used it for board games. I would love to link to this if you don't mind, it's such a great project, one that is totally going on my to-do list!
ReplyDeleteI have a table just like this that I HATE and now I know exactly what to do with it! HOORAY! Great idea!
ReplyDeleteWow! That is fantastic. I love this idea. Your instructions are so helpful, too. Plus, I just saw a similar sized coffee table for sale!
ReplyDeleteOh. My. Gosh. This is the most ridiculously beautiful thing I've seen in such a long time! I want one. Now! :-) I would never have thought it was possible for a "normal person"- ie. not an upholsterer- to do this, but you've given me the confidence and tips to think I can! Just sensational. Well done.
ReplyDeleteAbsolutely awesome!!! Thanks so much for sharing.
ReplyDeleteI have wanted to do this for a long time. Yours looks fantastic!!
ReplyDeleteOMG thank you for this idea, I have been wanting a coffee table and this has given me inspiration for a really nice one now.
ReplyDeleteGreat transformation!!
ReplyDeletethat totally ROCKS.
ReplyDeleteThank you so much for posting this! I've been wanting to make one. Do you mind if I ask what the name of the paint color is in your room? I've had such a hard time finding one that shade that works.
ReplyDeleteWow!!
ReplyDeletemuchas gracias esta buenisimo!!!
Gorgeous!! Great job!
ReplyDeleteUtterly brilliant. I'm sitting here looking at our ugly pine coffee table and thinking "Viola!"
ReplyDeleteI need an ottoman and this is the inspiration I need for a diy project. I am scanning Craigslist as we "speak".
ReplyDeleteBeautiful work. And an inspired project. Thanks for the tutorial!
ReplyDelete(spotted featured on CRAFT Magazine's blog)
Thanks for the nice comments, everyone! After living with and using the ottoman for several weeks now, I'm still really happy with the project. I'd love to see pictures, if any of you make your own!
ReplyDeleteSarah - my living room color is Martha Stewart's Moonbeam (from Lowe's). It is the greatest shade of pale blue-gray. I think it is subtle and fresh. Love it!
amazing. you really know your stuff! love your cozy home!
ReplyDeleteHi Jenny, just wanted to thank you for this post, which inspired me to have a go myself -- much easier when you know someone else has already tried (and succeeded!!). I took a broken coffee table and used the legs as the starting point for a bed-end bench. If anyone's interested, you can see pics on the Living Etc forum:
ReplyDeletehttp://www.livingetc.com/forums/showflat.php/Cat/0/Number/70511/page/0/fpart/1/vc/1
That's a wonderful idea :) Thanks so much for posting this.
ReplyDeletegorgeous job! now i'm gonna scour cl until i find a cheap coffee table to experiment on. your tufting procedure is so much easier than what i would have thought of.
ReplyDeleteon another note, i absolutely love galvanized by ralph lauren. just enough black, just enough brown.
I love your ottoman! I made one using your how to. Pics and stuff here if you want to see
ReplyDeletehttp://rcandkd.blogspot.com/2009/08/house-fun.html
Thanks for the great idea!
Love your style! I found your blog through the Nester's. You have given me great inspiration! Love the ottoman- old and new!
ReplyDeleteThank you for the post! My boyfriend actually found it and we got the motivation to create one of our own!
ReplyDeletePhotos are in the post below!
http://marilyn-elizabeth.blogspot.com/2009/09/finally-finished-product.html
This is awesome. I am so going to do this in June (when my Mom comes up to help). Thank you so much. I found your blog through a friends blog and LOVE it. Very creative and inspiring!
ReplyDeleteAbsolutely amazing!! Cant wait to get started on my own DIY Ottomon. Thank you for sharing this real easy DIY - Simply love it!!! WOW
ReplyDeleteI'm curious how you do the button tufting. Does the button kit from Joann's come with more instructions? I'm having trouble envisioning how the needle/thread/button is set-up and which direction you go through... and how it becomes secure. I'd love to do this on a DIY headboard that I have plans to make. If you could e-mail bits.and.pieces@hotmail.com to let me know, that would be great! I would so appreciate it.
ReplyDeleteThanks,
Amanda
I've been so inspired by this post for about 2 months now..my difficult part is finding the right table..ugh, some people in this area really think $50 is a reasonable price for a janky ol' table..but, anyway, I wanted to tell you how insanely great I think this project turned out..and how sorry I am that you didn't end up getting your 'Restoration Hardware' version..I'm sad also because the store here had their final warehouse sale @ some point last year..and I missed it :(
ReplyDeleteThanks for the inspiration!! I found an almost identical table for $12 at The Salvation Army...I couldn't believe it!! I dropped about $70 on supplies and fabric....(it would have been a lot more but JoAnn Fabrics has some sweet coupons!!). I'm at the batting stage and fingers crossed I'm doing this right! I wanted to take the legs off too but no such luck. Either way, it's fun and I can always start over. Thank you!!
ReplyDeleteI am SO glad you posted this! I have my OWN coffee table that I have decided to make into an ottoman table. The top is a little messed up - but otherwise a great table. This shows me HOW to do it and I'll be doing just that in the next couple of months!
ReplyDeleteI took on tiling my kitchen table 6 months ago and love it. I am always looking for ways to make my house more attractive on a tight budget! Thanks for sharing.
wow. that's all I can say.
ReplyDeleteour readers would love to be able to find THIS tutorial!!
do get yourself a link back to this article. this is where:
http://www.finecraftguild.com/diy-tutorial-linky-party-4/
rose
p.s. i know, i know, it is FABO already. However.... consider lowering the feet of your ottoman a little bit. this would make it look more like the Restauration Hardware version. What do you think?
Because of their antique pandora jewelry aspect, Art Deco rings make excellent engagement rings. Art Deco rings are vintage pieces, which creates a wonderfully buy Pandora romantic feel. These are antique, and thus, they make a perfect jewelry to pass on to future generations. With their hand engraved designs that discount pandora hearkens back to a simpler time, these pieces also possesses a very feminine pandora jewerly look.Art Deco engagement rings are truly unique with its large square center stone surrounded by smaller square stones or triangular stones. They put a pandora earrings unique twist on the traditional and classic diamond rings.The following are a few tips in buying Art Deco engagement rings.Make sure that cheap pandora earrings your future wife will not mind having an Art Deco engagement ring instead of the traditional diamond engagement ring.
ReplyDeleteHello, Love the ottoman. Question: what is the name of the paint color in that room, if you don't mind sharing? Thanks!
ReplyDeleteWow!! So impressed! I have been looking for the perfect coffee table/ottoman for my living room and cannot find one for the right price!! I am definitely going to try this. Thanks for the step-by-step!!
ReplyDeleteI am about to start this project tomorrow. Sadly couldn't find any RL paints around my area but found a good Valspar color Fired Earth! So excited! Thanks for this awesome idea.
ReplyDeleteI'm also curious how you do the button tufting thing. Do you need a really long sewing needle? I just bought my coffee table and I am gathering all my goods! If you have any tips for the tufting (and the upholstery nails) I would really appreciate it! Your blog is incredible, you have inspired me for months!
ReplyDeleteNatalie
nkh124@yahoo.com
Great Project. I am thinking of doing a similar thing to make a padded bench for near the front door. When you applied the two pieces of foam side by side with spray adhesive, do you find that they stay in place? Or do they shift around? I am concerned that if we sit on our bench many times, the crease between the foam pieces will spread. Any tips? Thanks.
ReplyDeleteamazing! I love it. This looks so good.
ReplyDeleteHere's a post to my version. I didn't do the upholstery buttons, although I did make them and drill the holes, because my needles weren't long enough, but I used gimp to make a pattern and then threw the buttons on with hot glue/not quite the same effect, but I can always go back and add them when I get a long enough needle and some patience.
ReplyDeletehttp://ocgardenjen.blogspot.com/2011/09/trash-to-treasure-my-new-family-size.html
I LOVE THIS!!! thanks for sharing! I have a table just like this that Im going to do! YAY! Thanks for the tutorial! :)
ReplyDeleteI have that exact same coffee table and have been wondering what in the world to do with it! Thanks for the idea!
ReplyDeleteThanks for the great idea. My wife and I had been shopping around for a large ottoman for awhile now and just didn't want to pay the prices we were seeing. We found an old coffee table for ~$30 and followed your steps to create an ottoman that we now love. I think we spent ~$150 for everything, so we saved at least a few hundre dollars. Should we split the savings with you? Ha ha... Thanks.
ReplyDeleteThanks so much...I made one like the west elm essex but used your tutorial for help. Trying to figure out how to send you a pic but just wanted to say thanks!
ReplyDeletehttp://pinterest.com/pin/19421842112790214/
ReplyDeletehere is a link to the one I made, thanks for the help
I Love it!! OK, but I must ask, have you buttons stayed put? The reason I ask is because my mom, grandma and I made something similar to your beautiful ottoman except my dad just build a square box out of plywood for the base. My mom and grandma have tried various types of quilters thread/wire (you name it, they have probably tried it) to keep those pesky buttons on! Could you recommend something to keep them in place? Thanks!!!!
ReplyDeleteIt's been 3 years and this project is still grabbing attention! I know it sure got mine. I'm going start stalking craigslist right now for the perfect ottoman. Thank you for the inspiration!
ReplyDelete