Sponsored Post: DIY Tortoise Shell Resin Table Top



This post is sponsored by Glad. We’re taking small steps to do our part and want to help you waste less too. Visit GLAD.com for more information.

Like I mentioned recently, it makes me feel really good to give old furniture a new life. It's rewarding to see furniture transformed, but it's also environmentally responsible. I'm so happy to be working with Glad on this series.


When I found this little French cabinet, it was in really (REALLY) bad shape. The actual cabinet itself mostly just needed a sanding and a new paint job, but the top was almost unsalvageable.



I scrapped off the peeled veneer as much as possible, but the back half was absolutely impossible to pull off. There was just too much glue holding it down. I considered cutting a piece of wood or stone to fit the top, but then I thought it would be really cool to do a resin top in a tortoise shell pattern.



With resin, your surface doesn't have to be 100% level, so I just gave the top a little sanding and left it as is.



There used to be a back plate on this piece I guess, so there was a gap in the back. I just used a couple of strips of Balsa wood to fill the space.



Balsa wood is super soft, almost like styrofoam, so it was easy to zip through with a little coping saw. I was happy because I could easily mimic the shape of the existing moulding.



Pretty seamless! I wouldn't use balsa for a bigger surface than this. It is a very soft wood and not super sturdy, but this part is in the very back and everything is getting a coat of resin, so it was a good solution here.



Before priming, I filled any cracks with my favorite wood filler. The best method is to fill with your finger and then wipe away the excess immediately with a wet rag.



I found my resin at Blicks, but it's carried everywhere. I need about 32 oz for this project, which cost about $25.



Also at Blick's, I visited the glass paint section.



To make a tortoise shell pattern, you'll need a bright mustardy yellow and two shades of brown (medium and dark)



After priming the whole cabinet with Zinsser's, I built some walls around my table top with duck tape. You could also use painters tape, but get the extra sticky kind. You want there to be a really tight seal here.



If you're going to attempt a resin project, I recommend doing some Youtubing first. I had to do this taping method because of the curve in the front of my cabinet, but if my cabinet had straight sides I probably would have tacked up a couple pieces of wood for an even tighter seal.



You should follow the instructions on your resin box, but the basic idea is you'll need to mix resin with hardener and then stir. I made about 24 ounces for the yellow base.



I used three drops of the yellow glass paint to make this color. I wanted it bright and semi-transparent. The white paint underneath makes the colors very clear.



After pouring I quickly but carefully moved the resin around to get an even fill.



Then I mixed about 8 oz of medium brown paint. Just one drop of paint at first! You want the first layer of brown to be light. I used an old baby medicine dropper for this step.



One small dropper full makes a quarter-sized spot. The brown will thin out and spread though, so try to have a light hand here. Just place the resin and sort of let it do it's thing. It's a pretty fun art project actually.



Add another drop or two of paint to darken the resin for the next layer.



I had some dripping, but not a ton. I sort of just watched while the resin hardened and wiped up drips as they happened. It only took my resin about 30 minutes to get pretty firm. Then I let it sit overnight to fully cure. In the morning I pulled off the duct tape.



And did some light sanding to even out the edges.



Then I painted the rest of the cabinet (I had only primed the piece before doing the resin, which ended up being a good choice because of the drips).

This is my recent favorite paint. I discovered it when I did the One Kings Lane sale. My painted recommended it. It's Benjamin Moore's Advance line. It's oil based, but it's low VOC (it has a slight odor, but it mostly smells like linseed oil, not crazy chemicals). The finish is AMAZING. It is super hard-wearing and it comes in multiple finishes. I love the high gloss best.



I used BM Tomato Red for the interior of the cabinet and BM White Dove for the exterior.



Here it is all done! I'm waiting until the paint fully cures before filling it up, but I'm thinking it's the perfect piece for all my decorator supplies that are always sprawled over my desk, like tape measures and paint decks.



I love the surpise orange interiors. And I love the simplicity of the white. It just looks so pretty with the tortoise shell pattern on top! A color on the frame of the cabinet would have been too much here. (Also, there's a lot of color and painted furniture in my living room already!) :)





Psst... If you're looking for some cute little accent tables for your bedroom or living room, I rounded up my favorites HERE. And! If you're looking for some cute accessories for your nightstands, check out THIS POST. xx

51 comments:

Sarah Roads said...

What a great idea! Turned out so much better than I would have expected! Another great DIY! Thanks.

Michelle said...

How do you come up with this stuff!!! Perfection!

Laurie said...

Amazing! I'm now trying to figure out what to try that on...so cool.

Chic Coles said...

You are truly amazing.We can not believe this DIY. Looks great and we love the interior color.

Ashley said...

Jenny, you are on such a roll! I am so in awe of your skills and your very well-written tutorials! I'm always excited to see what your next DIY projects will be--they never fail to impress.

Natty by Design said...

Love this! Just a heads up: the Advance paint is almost what I use exclusively and it is low VOC, but the fumes are just as hazardous to people as solvents. Low VOC is better for the environment, but not for us. Plenty of ventilation is still a must with waterborne paints.

courtneyoutloud said...

That is awesome! I didn't even know you could do DIY tortoise shell!

Jean @ Flower Hill said...

Love that tortoise shell finish!

Taylor Morgan said...

hey this is Taylor Hartley from your ward. Amanda showed me your blog last night and I LOVE it! Interior design blogs are my favorite! I will defiantly be following :) tell Claire I say hi! She is so cute!

Hannah said...

Just when I think you've done your best project, you surprise us with something better! I love this!

Champagne Lifestyle on a Beer Budget

Newburgh Restoration said...

Great job! It looks expensive!

Madame Meg said...

Wow, I'm so glad you did this- it looks great! Every once in awhile I think about trying a resin project, but totally chicken out. But this looks like something I might actually be able to do! Yay!
: ) Meg

Stephanie said...

Oh my goodness, Jenny! I LOVE THAT CABINET. Amazing!

Smitten...by Abigail said...

That is awesome!!! Thanks for the new idea!

Naz said...

Such a fabulous idea. I loved it!!

Molly @thewaffler said...

I agree -- the orange surprise is great!

Amber said...

What a fantastic transformation. Stellar.

Sally@ Abode Casa Home said...

Fabulous project...great job!

Louisa said...

Jenny,
It looks great! I really do not know how you come up with these ideas - but I love that you do and that you post for everyone to see!

Could you share the curtain fabric? It looks so familiar but I can't recall the name of it.
Thanks!

My Crafty Home-Life said...

Jenny, it's fantastic...please tell me you used drop cloths! Your gorgeous rug and beautiful table...you are the bravest of them all!

Shannon said...

So beautiful! Thank for sharing your process. :)

VictoriaArt said...

Really neat! Love your guts with the resin top! It came out wonderfully!
Great step by step explanations for this project!
Enjoy the fruits of your labour!

L.A. in the bay said...

wow! what an incredible transformation!

cmf221 said...

Beautiful! I love your DIY posts!!!

Here's another "recipe" for faux tortoise (from an old Trading Spaces episode) that is super easy and comes out great:

Base Color: Latex Satin Finish Paint (cream, beige, caramel, etc)
Paint 2 coats base color - let dry completely (at least 4 hours - overnight is best)

Sand lightly & apply glaze.
Glaze:
3/4 c. malt vinegar
2 Tbs. Burnt Umber Powder Pigment (must be powder)
1 Squirt liquid dish soap

Mix glaze ingredients and apply liberally with a small brush. Then dabble your fingers on glaze like you're playing a piano (lightly). Don't allow glaze to dry while your dabbling or you'll get fingerprints. Finish may look chalky as it dries but that will go away when you finish with at least 2 or 3 coats coats high gloss spray varnish.

Laurie H said...

Sorry for the off-topic question, Jenny. Would you mind sharing the source of the fabric for your drapes? I love them! I don't recall seeing this previously and I'm not seeing it after a search today. Thanks!

Danee said...

what a fun pop of color

jessica said...

fantastic!!!! I had a bad experience with resin once....so i dont think i will be trying this, but it looks AMAZING. and i never would have thought to do such a thing!!!! awesome!!!!!
xoxo jess

laxsupermom said...

Wow! That's such a cool DIY! I've seen plenty of resined tops, but never this tortoiseshell technique. Thanks for sharing.

Nuit said...

what an amazing transformation!!!

Bonnie said...

Oh so cool! Thank you for the DIY...I have a similar cabinet and now am excited to do something with it!!!

Jennifer L. Griffin said...

Will you ever run out of great ideas? Amazing! Beautiful!

Laurie said...

So creative and what a great finish. Love the colors too.

Lisa @ Shine Your Light said...

Oh my gosh, I cannot believe the things you tackle! I have always wanted to do resin on a tray, but to add the tortoise shell design? Genius. Love the orangey red interior also. You are so crafty and I don't know how you find the time in the day. Thanks for sharing another great and interesting DIY!

Evie said...

I love the tortoise shell look...you have me inspired!!

Ruth said...

Lov, love, love it!!! It's amazing. I am always making sure things get recycled and reused. The less stuff that goes to the dump the better.

Ruth

Kelly@Bungalow Blue said...

Wow, what a great idea! It turned out so well, awesome job!

modernhaus said...

I had no idea you could tint a pour-on finish with glass paint...I'm pretty resourceful but never would have known about half the things you come up with!

My problem is not so much pieces with destroyed tops, but those really beautiful wood pieces that, for whatever odd reason, have formica/laminate tops. Always looking for a new solution for those. Thanks!

Iryna said...

My goodness, this is breathtaking! I always wonder how you approach projects like these. Do you read up on the technique a bunch before attempting, do you try the technique with a "throw-away" piece, or do you just jump in. I join other commenters in applauding your courage to tackle a project like this.

Brooke @ Inside-Out Design said...

This looks amazing! I am dying to try resin now!!

Jess said...

that is a seriously impressive DIY. Awesome!!


http://www.laceandfadedjeans.com/

Marcus Design said...

That piece really got a new lease on life! I love it's curves and shape, and now with this top it looks absolutely fantastic. Well done Jenny!
Nancy xo

Sue said...

This looks so fantastic! I would never have expected that sort of transformation to be possible...it's impressive to see what you can do.

Cluff Family said...

You are amazing!!! I love being able to see all the beautiful things you create. Seriously inspiring!!!

Anonymous said...

great idea! You could also maybe try a different cupboard pull, something longer?

mamafrog said...

Dooes the resing ever feel tacky after awhile? I wonder how weather affects it? I know varnish can sometimes feel that way in humid weather. It's a great little cabinet now!

House of Scout said...

Shut up! That top is like the greatest thing EVER! Going on my To Do list now.

Jenna @ Homeslice said...

I loved your accessory round-up. Especially the classic clock and hammered tray. Great finds!

Meghan Shadrick said...

You have the BEST DIY project Jenny. Seriously, where do you find these things!?$#. Love the resin and would love to try sometime.

Mara Kofoed said...

This is brilliant. I love what you did with this table. Just this morning my friend snagged a similar table off the street so I just forwarded to her your tutorial.
xo

mrsroberts said...

What a great job! I'm seriously impressed!

Also, I love your office chair! Do you mind sharing where you got it? Thanks!

Anonymous said...

You are genius.

LinkWithin

Related Posts with Thumbnails