Some of you asked about the little antique black chair in Heather's room. I got it at the flea a couple months ago for $10! It's super old and the floral fabric was kind of cool as is, but it was pretty sun bleached.
(You can tell how long ago I bought this chair - the console hadn't been refinished yet) :)
I pulled off the top layers of fabric without much effort - the fabric basically disintegrated. But it was so thick that the inside was pretty pristine and wouldn't need to be replaced (which was lucky because this chair had springwork and I didn't want to deal with that!)
For the new fabric, I wanted something with a sheen to it, but I didn't want any color or pattern because there is already a lot going on in that room with the neon desk and the patterned green rug.
I'm a pretty big fan of waxed jeans, so when I stumbled across this black waxed cotton at Graylines in the garment district, I thought it would be cool on the antique chair. It actually kind of looks like leather a bit.
I used the old padding as a pattern for cutting out the new fabric. (the padding was a little stretched out, so it didn't end up working as well as this approach normally does, but at least I didn't cut the piece too small)
I cut out notches so the fabric would sit around the back pieces.
And then I started stapling. I always start upholstery projects in the most difficult area, which was the back in this case. I swear by this inexpensive stapler, especially if you use the same brand of staplers. The staples I had on hand were too long and that's why they're sticking out a little, but it's no big deal at all to tap those in with an upholstery mallet.
Once the back part of the chair fabric was secured, I started on the front of the seat and pulled the fabric as taut as I could. It was a little tricky to pull the fabric enough while also getting the scallop shapes right, but that's the great news about upholstery projects. It's hard to really screw things up. If you put a staple in a the wrong place, you just pull it out and try again.
The sides and then the corners of the chair are stapled last, again, pulling tight and smoothing with your hand the whole time.
I trimmed the excess fabric and then tapped in the staples that were sticking out a bit.
I was going to do a self welt for the trim, but I fount some of this really cool vintage woven leather for sale at JEM fabrics in Tribeca. It felt all Chanel-y to me with the alternating black and white flowers.
I started the trim in the back (it's a good idea to start your trim in the least conspicuous place) and used a not-too-thick line of my beloved Magnatac to secure the trim and cover the staples.
I love how the trim adds just a little bit of texture and interest to the desk area. The black on black upholstery could have been a little stale without it.
And doesn't the waxed cotton look a bit like leather? I'm thinking it would be a great choice for dining chair upholstery since it's water and stain-resistant, but looks way better than vinyl in person. I'll have to poke around online to see if I can find any more colors.